Backdrop setup and packdown guide
Small Stand Setup & Packdown guide
1.Select a flat and thoroughly dried surface for setup. ensuring it is clear from obstacles
(Under no circumstances should our props be set up on an uneven or sloping surface. In the event of a windy or rainy outdoor environment, such conditions may lead to equipment instability, posing a risk of injury or potential property damage. To mitigate these risks, it is important to avoid setting up our equipment in such adverse conditions. Furthermore, if the weather turns inclement during outdoor use, stop using the equipment immediately and bring them to a safe place. )
2. Unfold the metal stand by gently pulling the base downward until it automatically locks into place.
3.Place sandbags, as provided, onto the base to prevent any potential tipping.
4. (Note that this step requires the involvement of 2 people for safety reasons.) Position the backdrop at the front of the stand and hold it firmly against the stand, ensuring that the stand is centered on the hooks.
5. Adjust the stand height if required
6. Use the provided cable ties to encircle the stand frame and pass them through the hooks, fastening them securely.
7. Continue securing the remaining hooks in a similar manner.
8.Conceal or trim any excess cable tie ends to prevent accidental injury. Verify the stability of the setup by gently pushing the backdrop, ensuring that no one is standing in front of it during this test.
9. To disassemble, simply cut the cable ties and remove the backdrop from the stand. Maintain a firm grip on the stand with one hand to prevent sudden folding, place one foot on the base then use the other foot to lightly press the spring connection to fold the stand back.
10. Safely store the equipment in a dry and secure location until it is needed for future use.
Large Stand Setup & Packdown guide
1.Choose a flat and thoroughly dried surface for the setup, making sure it is free from any obstructions.
(Under no circumstances should our props be set up on an uneven or sloping surface. In the event of a windy or rainy outdoor environment, such conditions may lead to equipment instability, posing a risk of injury or potential property damage. To mitigate these risks, it is important to avoid setting up our equipment in such adverse conditions. Furthermore, if the weather turns inclement during outdoor use, stop using the equipment immediately and bring them to a safe place. )
2.Unfold the metal stand, ensuring that the bracket is securely locked in place.
3.Loosen the wing screw located on the side of the stand. Attach the metal brace, then tighten the wing screw securely.
4.Place sandbags on the base, as provided, to prevent any potential tipping.
5. Position the backdrop at the front of the stand and hold it firmly against the stand, ensuring that the stand is centered on the hooks. Please note that this step requires the assistance of 2 people for safety.Use the provided cable ties to encircle the stand frame and pass them through the hooks, fastening them securely.
6.Continue securing the remaining hooks in the same manner.
7. Conceal or trim any excess cable tie ends to avoid the risk of accidental injury.
8.Confirm the stability of the setup by gently pushing the backdrop, making sure that no one is standing in front of it during this test.
9.To disassemble, simply cut the cable ties and remove the backdrop from the stand. Lay the stand down on the floor, then loosen the wing screw to release the brace. While pressing the bracket lock, please continue to hold the stand with one hand. Two people are required to ensure the safe folding of the stand.
10.Safely store the equipment in a dry and secure location until it is needed for future use.